Lost CAN Communications to HMI

Communications lost between the main controller and the Human Machine Interface (HMI) display.

Possible causes

Damaged or loose display interface cable
Power failure at the front panel
Strong electrical noise interference

Recommended actions

Check cable connection behind the display
Inspect for bent pins in the connectors
Test with a spare HMI display

Can't find your code? Talk to an expert

$150

One-on-one phone session with a Low Temp refrigeration tech. Emergency temporary assistance only.

Email (opcional)

Teléfono (opcional)

¿Tienes un cupón?

I understand this is emergency temporary remote guidance only, no repair is guaranteed, I assume all risks, and Low Temp Service is not liable for cargo, engine, electrical, mechanical or accident damages. I accept the Terms & Conditions.

Have a question? Ask the community

Thousands of refrigeration mechanics read and answer for free. Post your case in under 1 minute.

Other Thermo King codes

00No Alarms Exist 02Check Evaporator Coil Sensor (Zone)03Check (Control) Return Air Sensor (Zone)04Check (Control) Discharge Air Sensor (Zone)05Check Ambient Temp Sensor 06Check Coolant Temp Sensor

View all Thermo King codes

Need a professional diagnosis?

Low Temp Service — refrigeration experts in Florida.